Chapter 2 System Operation 9
2.3 Introduction to the 8000 Front Panel
2.3.1 Front Panel Familiarization
Described below are the functions of each area of the front panel, as shown in Figure
1.
Figure 1 - 8000 Front Panel
1.
Power On/Off Switch
- Switches on/off the AC power to the unit.
2.
Laser Enable On/Off Switch
- Safety key-switch that enables/disables all laser
outputs. See sections 3.6.12 and 3.3.4 for additional information on laser
interlock.
3.
Laser Active LED
- Indicates one or more laser outputs are on.
4.
Display Soft Keys
- These are the four dark keys located to the right of the
display. The function of these four keys varies depending on what menu is
displayed. See section 2.4.1.4 for a complete description of soft keys.
5.
MASTER Key
- switches to the master display from any screen in the system
(see section 2.4.2).
6.
Cursor Control Keys
- Moves cursor up or down between editable data fields.
The left arrow functions as a backspace in numerical entry fields, or as a
previous choice in a multi-choice entry field. The right arrow functions as a next
choice in multi-choice entry fields. See section 2.4.1.3 for a description of data
fields.
7.
Numerical Keys
- Used to set parameter values of numerical entry fields in
various screens.
8.
MENU Key
- Switches to the main menu from any screen in the system (see
section 2.4.2).
9.
FUNCTION Key
- Used to execute user macros and special functions (see
section 2.4.2).
10.
CLEAR Key
- Clears numeric data typed, but not yet entered, in an edit field.
11.
ENTER Key
- Used to enter parameter values set with the numerical or
left/right arrow keys.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
