2
About The Meter
2.6 DISASSEMBLY
You may need to open up the meter for one of the following reasons:
¥ To check or change the 115 or 230 Vac power jumpers.
¥ To install or remove jumpers on the main board.
Disconnect the power supply before proceeding.
To remove and access the main board, follow these steps:
¥ Disconnect the main power from the meter.
¥ Remove the back case cover.
¥ Lift the back of the main board upwards and let it slide out of the case.
10
To Next Page
Loading...
