8
Specifications
ANALOG OUTPUT (if applicable)
Signal type: Current or voltage
Signal level: Current: 10 V max compliance at 20 mA output
Voltage: 20 mA max for 0-10 V output
Function: May be assigned to a display range or proportional control
output with setpoint #1 when used as a control output.
Linearity: 0.2%
Load Regulation: 1.1%
Line Regulation: 0.02% /V ac
Step Response Time: 2 - 3 seconds to 99% of the final value
INPUT POWER INFORMATION:
Voltage - ac 115/230 Vrms ±10%
dc 9.5 at 950mA dc to 32 V dc at 250mA dc
Frequency: 50-60 Hz
Power: 9.5 watts max.
External Fuse
Protection Recommended:
ac 115V IEC 127-2/III, 125mA, 250V (T Type)
or UL Slow-Blow, 175mA, 250V
ac 230V IEC 127-2/III, 63mA, 250V (T Type)
or UL Slow-Blow, 80mA, 250V
ENVIRONMENT
Operating temperature: 0 to 60¡C (115/230 V rms ±10%)
Storage temperature: -40¡ to 85¡C (-40¡ to 185¡F)
Relative humidity: 90% at 40¡C (non-condensing)
MECHANICAL
Panel cutout: 1/8 DIN 3.62 x 1.78" (45 x 92mm)
Weight: 1.27 lb (574 g)
Case material: Polycarbonate, 94 V-O UL rated
38
To Next Page
Loading...
