Newport MKS HXP Series - Tclscriptkill; Tclscriptkillall

HXP Command Interface Manual
Parameters
Input parameters
(string) TCLFileName: TCLFileName
(string) TaskName: TaskName
(string) InputParametersList: InputParametersList
Output parameters
(string) OutputParametersList: OutputParametersList
(string) errString: The failure reason
Return
(int) error code: 0 in success and -1 on failure
Description
This function is used to process synchrounous TCLScriptExecuteAndWait command
which is used to Execute a TCL script from a TCL file and wait the end of execution to
return. Refer to the XPS Programmer's manual to get the command description.
2.2.9 TCLScriptKill
Syntax
C# prototype
int TCLScriptKill(string TaskName, out string errstring)
Python prototype
[errstring] TCLScriptKill (TaskName)
Parameters
Input parameters
(string) TaskName: TaskName
Output parameters
(string) errString: The failure reason
Return
(int) error code: 0 in success and -1 on failure
Description
This function is used to process synchrounous TCLScriptKill command which is used
to Kill TCL Task. Refer to the XPS Programmer's manual to get the command
description.
2.2.10 TCLScriptKillAll
Syntax
C# prototype
int TCLScriptKillAll( out string errstring)
Python prototype
[errstring] TCLScriptKillAll ()
EDH0318En1042 — 12/18 6