Newport MKS HXP Series - Positionerusertravellimitsget; Positionerusertravellimitsset

HXP Command Interface Manual
Description
This function is used to process synchrounous PositionerStageParameterSet command
which is used to Save the stage parameter. Refer to the XPS Programmer's manual to
get the command description.
2.2.114 PositionerUserTravelLimitsGet
Syntax
C# prototype
int PositionerUserTravelLimitsGet(string PositionerName, out double
UserMinimumTarget, out double UserMaximumTarget, out string errstring)
Python prototype
[UserMinimumTarget, UserMaximumTarget, errstring] PositionerUserTravelLimitsGet
(PositionerName)
Parameters
Input parameters
(string) PositionerName: PositionerName
Output parameters
(double) UserMinimumTarget: UserMinimumTarget
(double) UserMaximumTarget: UserMaximumTarget
(string) errString: The failure reason
Return
(int) error code: 0 in success and -1 on failure
Description
This function is used to process synchrounous PositionerUserTravelLimitsGet
command which is used to Read UserMinimumTarget and UserMaximumTarget. Refer
to the XPS Programmer's manual to get the command description.
2.2.115 PositionerUserTravelLimitsSet
Syntax
C# prototype
int PositionerUserTravelLimitsSet(string PositionerName, double UserMinimumTarget,
double UserMaximumTarget, out string errstring)
Python prototype
[errstring] PositionerUserTravelLimitsSet (PositionerName, UserMinimumTarget,
UserMaximumTarget)
Parameters
Input parameters
(string) PositionerName: PositionerName
(double) UserMinimumTarget: UserMinimumTarget
(double) UserMaximumTarget: UserMaximumTarget
Output parameters
(string) errString: The failure reason
63 EDH0318En1042 — 12/18