Newport MKS HXP Series - Positionersgammapreviousmotiontimesget

HXP Command Interface Manual
Parameters
Input parameters
(string) PositionerName: PositionerName
(double) Displacement: Displacement
(double) Velocity: Velocity
(double) Acceleration: Acceleration
(double) MinJerkTime: MinJerkTime
(double) MaxJerkTime: MaxJerkTime
Output parameters
(double) DisplacementDuringAcc: DisplacementDuringAcc
(double) DisplacementDuringVel: DisplacementDuringVel
(string) errString: The failure reason
Return
(int) error code: 0 in success and -1 on failure
Description
This function is used to process synchrounous
PositionerSGammaParametersDistanceGet command which is used to Returns distance
during acceleration phase and distance during constant velocity phase . Refer to the
XPS Programmer's manual to get the command description.
2.2.111 PositionerSGammaPreviousMotionTimesGet
Syntax
C# prototype
int PositionerSGammaPreviousMotionTimesGet(string PositionerName, out double
SettingTime, out double SettlingTime, out string errstring)
Python prototype
[SettingTime, SettlingTime, errstring] PositionerSGammaPreviousMotionTimesGet
(PositionerName)
Parameters
Input parameters
(string) PositionerName: PositionerName
Output parameters
(double) SettingTime: SettingTime
(double) SettlingTime: SettlingTime
(string) errString: The failure reason
Return
(int) error code: 0 in success and -1 on failure
Description
This function is used to process synchrounous
PositionerSGammaPreviousMotionTimesGet command which is used to Read
SettingTime and SettlingTime. Refer to the XPS Programmer's manual to get the
command description.
61 EDH0318En1042 — 12/18