XPS-D Controller User Interface Manual
NOTE
This will reboot the controller and reset the controller configuration.
NOTE
Controller configuration files including stages.ini and system.ini files can be
downloaded under Files→ Configuration files prior to updating the controller
firmware. See chapter 2.30: “Files – Configuration Files
” for more information.
2.9 System – Error file Display
The Error File Display is another important screen for troubleshooting the XPS
controller. When the XPS encounters any error during booting, for instance due to an
error in the configuration files or because the configuration is not compatible with the
connected hardware, there are entries in the error log file that guides you to correct the
error. If several consecutive boot sequences contain errors, they are all reported.
When no error is detected during the last system boot, this file becomes blank.
9 EDH0405En1012 – 09/18
To Next Page
Loading...
