XPS-D Controller User Interface Manual
Step 1: Configuration name
1. Enter a name for the Gathering Configuration. Example: Stage_Position.
Step 2: When to start
This step configures the data collection trigger and is based upon the API function
EventExtendedConfigurationTriggerSet([Actor].[Category].Event Name, Parameter1,
Parameter2, Parameter3, Parameter4). For more information regarding this API, refer to
Features Manual. If this section is not empty, delete example event trigger by clicking
REMOVE.
1. Click on ADD TRIGGER and the following window appears.
2. From the list, highlight Immediate or Always. Click ADD and then click OK.
Example: Immediate
Step 3: What to collect
This step configures the data type to be collected and is based upon the API function
GatheringExternalConfigurationSet([DataType]). Refer to Features Manual. If this
section is not empty, delete example data collection type by clicking REMOVE.
1. Click on ADD DATA and the following window appears.
2. From the list, highlight the positioner name from which position data will be
collected and then click ADD. Example: Group2.Pos
31 EDH0405En1012 – 09/18
To Next Page
Loading...
