EN 34
Device Name -
Show the projector’s name.
IR Motion Detection -
There are two PIR motion sensors at the front of the projector. When it
detects people approaching, the projector will turn off the laser light to
protect their eyes. This function is active by default and can be disabled
in the Settings menu under General. If the projector turns off due to
motion detection, you may press any button on the remote control and
the laser light will return to its normal brightness.
Sleep -
Set a timer for the projector to enter Sleep Mode. When the projector
enters Sleep Mode the projector display will turn off. The timer options
are 30 minutes and 1 hour.
Time Format -
This setting allows you to set different time formats. Choose from either
a 12-hour or 24-hour cycle.
Time Zone Selection -
You can select the appropriate Time Zone for your region.
Language Settings -
Select your preferred display language.
Unknown Sources -
Unknown sources is an Android accessibility setting that allows the
projector to trust and install applications from developers, publishers, or
other sources outside of the Google Play store. You can turn this
function on or off as needed.
About -
View the projector's technical information such as the product serial
number, software version information, network information, disk
information, and legal information.
Factory Reset -
Reset the device to factory settings.
To Next Page
Loading...
