NEXIQ Technologies USB-Link 3 Wireless - Product Specifications

USB-Link™ 3 Installation and Setup Manual
Chapter 2: Introducing the USB-Link™ 3
Product Specications
The USB-Link™ 3 is congured with the following specications:
Feature
Physical Dimensions
Weight
Power Requirements
Operating Temperature
API Driver
Vehicle Protocols Supported
USB Communication
USB Connector
Wired Communication
Wireless Communication
Wireless Edition only
Vehicle Connector
Data
6.75” x 3.75” x 1.06”
(171 mm x 95 mm x 27 mm)
8 oz. (0.22 kg)
6 - 32 VDC @ 350 mA maximum
0 to +50 °C
TMC RP1210A, RP1210B, and RP1210C compliant
• CAN FD / J1939 FD / ISO15765 FD - 250K, 500K,
1M b/s with auto baud detection
• Single-wire CAN (SWCAN)
• ISO 11898-3 Fault Tolerant CAN (FTCAN)
• DOIP
• J1708
• J1850 VPW (Class 2)
• ISO PWM (SCP)
• ISO 9141 / KWP2000 (ISO 14230) K/L Line
• ALDL 9600 and 8192 baud
• ATEC 160 baud
USB version 2.0
Latching USB Mini-B
Automotive A to Mini-B USB cable 13 ft. (4 m) maximum
• Bluetooth
®
Class 1 adapter (up to 50 ft range)
• Dual band Wi-Fi (802.11 AC)
High Density D-sub 26-pin Male (HD26M)
7