USB-Link™ 3 Installation and Setup Manual
Chapter 3: Installing the Drivers and Setting Up the Device 30
Pair the Device
Use the Windows
®
utility to pair the device (i.e., the USB-Link™ 3 with your PC).
To pair the device:
1 Click on the Show Hidden Icons arrow in your PC’s System Tray.
The hidden icons are displayed.
2 Right-click on the Bluetooth
®
icon.
3 Click Add a Bluetooth
®
Device.
The Add a device screen is displayed.
4 Select the device displayed that matches the serial number on the back of your USB-Link™ 3
(e.g., USBL3_xxxxxx).
Figure 3.9 Hidden Icons
Figure 3.10 Add a Device Screen
To Next Page
Loading...
