USB-Link™ 3 Installation and Setup Manual
Chapter 2: Introducing the USB-Link™ 3
Communication Options: Wired vs Wireless
Prior to using the USB-Link™ 3, choose how you want the unit to communicate with your PC.
There are three options:
• Wired, USB Connection (pg. 12)
• Wireless, Bluetooth
®
Connection (pg. 13)
• Wireless, Wi-Fi Connection (pg. 14)
Wired USB Connection
A wired USB connection provides the advantages of high data throughput, low latency, and a
high-reliability data connection.
Wired communication between the USB-Link™ 3 and your PC requires an automotive A to Mini-B USB
cable (shipped with the USB-Link™ 3).
12
NOTE: For detailed instructions on making a wired connection, refer to Making a Wired USB Connection
in Chapter 3 of this manual.
IMPORTANT: Electronic Control Module (ECU) reprogramming requires both high throughput and critical
timing, and should always use a USB-to-PC wired connection.
Figure 2.2 Automotive A to Mini-B USB Cable
To Next Page
Loading...
