USB-Link™ 3 Installation and Setup Manual
Chapter 3: Installing the Drivers and Setting Up the Device 40
Using the USB-Link™ 3 Explorer Utility
The USB-Link™ 3 Explorer utility opened automatically when you installed the USB-Link™ 3 drivers
and utilities (see Figure 3.8, on page 26).
To re-open the USB-Link™ 3 Explorer once it has been closed, click on the Show Hidden Icons arrow
in your PC’s System Tray.
Double-click on the USB-Link™ 3 icon 3.
NOTE: You can also access the USB-Link™ 3 Explorer from your PC’s Start menu. Click Start and then
select All Programs > NEXIQ > USB-Link
TM
3 Explorer.
Figure 3.18 Hidden Icons
To Next Page
Loading...