USB-Link™ 3 Installation and Setup Manual
Chapter 3: Installing the Drivers and Setting Up the Device
Installation Process Outline
Step 1: Install the USB-Link™ 3 drivers (pg. 19).
Step 2: Connect the USB-Link™ 3 to the vehicle (pg. 27).
Connect to your PC using one of the following options:
• A wired, USB connection (pg. 28)
• A wireless, Bluetooth
®
connection (pg. 29)
• A wireless, Wi-Fi connection
There are two options:
- Mini Access Point Mode (pg. 32)
- Infrastructure Mode (pg. 35)
Step 3: Test the connection between the USB-Link™ 3 and the vehicle using the Device Tester (pg. 36).
18
NOTE: Images used throughout this manual are for illustrative purposes only.
To Next Page
Loading...
