USB-Link™ 3 Installation and Setup Manual
Chapter 3:
Installing the Drivers and
Setting Up the Device
Installation Process Outline (pg. 18)
Step 1: Install the Drivers (pg. 19)
Step 2: Connect the USB-Link™ 3 to a Vehicle (pg. 27)
Making a Wired USB Connection (pg. 28)
Making a Wireless Bluetooth Connection (pg. 29)
Pair the Device (pg. 30)
Making a Wireless Wi-Fi Connection (pg. 32)
Mini Access Point Mode (pg. 32)
Infrastructure Mode (pg. 35)
Step 3: Test the Connection (pg. 36)
Using the USB-Link™ 3 Explorer Utility (pg. 40)
The Conguration Tab (pg. 42)
Switching Modes: Mini Access Point and Infrastructure (pg. 43)
The File Menu (pg. 45)
The Tools Menu (pg. 46)
Ping (pg. 46)
Options (pg. 47)
The Help Menu (pg. 49)
This chapter provides instructions for installing USB-Link™ 3 drivers and utilities, connecting the
USB-Link™ 3 to a vehicle, connecting to a wireless network, testing the connection, and using the
USB-Link™ 3 Explorer utility.
17
NOTE: Images used throughout this manual are for illustrative purposes only.
To Next Page
Loading...