NEXIQ Technologies USB-Link 3 Wireless - Page 48

USB-Link™ 3 Installation and Setup Manual
Chapter 3: Installing the Drivers and Setting Up the Device 44
The following Wireless Settings elds are available:
• Network Name
• Security (WPA/WPA2)
• Password
The Internet Protocol (TCP/IP) portion of the screen is also available to enter the required settings.
There are two options:
• Obtain an IP address automatically (i.e., a dynamic IP address)
• Specify an IP address (i.e., a static IP address that does not change)
- IP Address
- Subnet Mask
- Default Gateway
NOTE: You will need to obtain this information (i.e., IP Address, Subnet Mask) from the designated IT
person or network administrator for your location. Depending on how your local network is congured,
you may also need to enter Default Gateway information.
NOTE: The settings for connecting to your company network may differ from one installation to another.
To ensure network security, your Information Technology (IT) administrator will need to oversee the
installation and specify the appropriate conguration parameters.