11
IMPORTANT INFORMATION
Ethernet cables MUST be connected using the correct IN/OUT
connectors as shown in section 3.1. Failure to use the correct
connection will result in malfunction.
3.5 System Conguration
3 Cabling and Amplication
Note: Here the audio link between cabinets is shown using ethernet cable
for clarity. It is possible to add an XLR link between each cabinet as a
redundancy. If for any reason the network link fails the analogue link with
the XLR cable will automatically activate.
Below is an example of a conguration of the LA210x systems with LAs518A
subwoofers. For other examples of signal connection see section 3.4.
To Next Page
Loading...