14
4 Mechanical Congurations
4.1 Rigging and Suspension Safety
• Before rigging or suspending NEXT LA210x systems, inspect all components
and all hardware for any signs of damage or missing parts.
• If you nd any damaged, corroded or deformed parts, do not use them,
replace them immediately.
• Do not use hardware that isn’t load rated or that its rating is not enough to
handle the system’s weight with a good safety factor (5 minimum). Don’t forget
that the hardware won’t just hold the systems weight. It must be sturdy enough
to handle dynamic forces, like winds for example, without any part deformation.
NEXT-proaudio advises customers to contact a licensed, professional engineer
regarding equipment installation.
• NEXT LA210x system installation should only be carried out by qualied personnel.
• Always use adequate protective clothing and equipment to prevent
possible injuries.
• Only install the systems on solid, levelled ground and isolate the surrounding
area during installation and operation, to prevent general public presence
near the systems.
• Be sure to understand and follow all local and national regulations regarding
equipment installation.
• Failure to comply with these instructions may result on injury or death.
To Next Page
Loading...