Next PROAUDIO LA210X - 2 Introduction and Overview; 2.1 Introduction; 2.2 Unpacking; 2.3 Overview

5
2 Introduction and Overview
Thank you for purchasing a NEXT LA210x line array element. This manual will
provide you with useful and important information about your NEXT LA210x. Please
devote some time reading this manual and keep it at hand for future reference.
NEXT-proaudio is concerned with your safety and well-being so please follow all
instructions and heed all warnings. A better understanding of specic features of
the LA210x line array will help you to operate your system to its full potential. With
a continuous evolution of techniques and standards NEXT-proaudio reserves the
right to change the specications of its products without warning. For the latest
information please visit: www.nextaudiogroup.com.
2.1 Introduction
2.2 Unpacking
Each NEXT LA210x line array element is built in Europe (Portugal) by NEXT-proaudio,
according to the highest standards and thoroughly inspected before it leaves the
factory. When unpacking your LA210x please examine it carefully for any signs of
transit damage and inform your dealer immediately if any is found.
NEXT-proaudio recommends that you retain the original packaging so that the
system can be repackaged in future if necessary. Please note that NEXT-proaudio
and its authorized distributors cannot accept any responsibility for damage to
any returned product using non-approved packaging.
2.3 Overview
The LA210x is a medium format three-way, coaxial, active line array element
designed to support a wide range of mid to large-sized touring applications and
installations where ease of use, from transportation to installation and rigging,
are critical. Built-in powerful DSP and amplication eliminates amplier racks, long
loudspeaker cables, and basic system calibration.
Custom made European transducers and a maximally optimized acoustic design
provide excellent sound delity at very high SPL levels. The LA210x features dual
10-inch (3-inch voice coil) neodymium woofers and a groundbreaking coaxial ring
radiator loaded by an exclusively developed OSWG waveguide. This acoustic
design delivers exceptional phase coherence and consistent coverage down to
300Hz and the most accurate transient reproduction.