Next PROAUDIO LA210X - Page 6

6
Onboard, advanced, powerful 96kHz/40bit SHARC DSP engine, monitored by
built-in LCD screen with a preset loading encoder, can be remotely monitored and
controlled through ethernet by a PC. The full-featured PC-software automatically
identies each device and allows simultaneous control of multiple devices through
grouping facility. Everything you need to ne-tune the sound of your system is right
there.
The system is driven by an internal fan cooled 2000W 3-way ultra-ecient Class-D
amplier module releasing 1550W for LF section, 275W for MF section and 175W
for the HF section. Integrated universal mains power supply with PFC provides
consistency and optimum performance anywhere in the world.
The 3-point rigging system allows for quick and easy system setup. The LA210X
elements are easily connected via two front links. A rear centre link allows the user
to dene relative splay angles from 0° to 10°. The system will automatically lock to
the predened angles when lifting the array.
2 Introduction and Overview