117
4.3.5 Set starting position
For normal navigation, all routes are planned from the current
position. In order to check future routes, you can turn off the
GPS receiver, and set the starting point of the route to a
different location than the current GPS position.
The procedure is explained here: page 83.
4.3.6 Regional settings
These settings allow you to customize the application for your
local language, measurement units, time and date settings and
formats, as well as to choose the voice guidance profile you
prefer.
Button Description
This button displays the current written
language of the user interface. By tapping the
button, you can select a new language from the
list of available languages. The application will
restart if you change this setting; you are asked
to confirm this.
This button shows the current voice guidance
profile. By tapping the button, you can select a
To Next Page
Loading...
Need help?
General
