Some channels display 'Poor/No Signal' 'Check Antenna
Connection'
■ Received signal is 'too weak' (i.e.; poor quality) to generate a stable picture
Please check antenna & cabling or contact your local TV antenna installer.
Picture regularly breaks up on some channels
■ The received signal may be too weak to allow the digital TV receiver to
reliably 'lock' to the desired signal and generate a stable picture.
Please check antenna & cabling or contact your local TV antenna installer.
■ 'Impulse Noise' interference from household appliances such as lights,
refrigerators, washing machines, electric stoves etc may cause pictures to
break up and audio to mute or distort momentarily
In the first instance, replace antenna fly-lead with a quality RG6 or RG59 Quad Shield
75 ohm coaxial cable fly lead. If problem persists, check / improve antenna & cabling
or contact your local TV antenna installer.
■ A masthead amplifier may be 'over-boosting' the antenna signal, which is
overloading the DTV tuner, resulting in poor reception on some or all
channels.
Please contact your local TV antenna installer.
Picture very infrequently breaks up on some or all channels
■ Electrical atmospheric interference caused by local or distant lighting
storms or heavy rain with wind in 'leafy' locations may cause pictures to
break up and audio to mute or distort momentarily.
■ Impulse noise interference from an infrequently used electrical appliance,
Or a passing Vehicle or lawn mower with a 'noisy' ignition system
For further DTV reception trouble shooting information please visit the Digital
Broadcasting Australia (DBA) website: www.dba.org.au
33
Reception Trouble Shooting Guide
To Next Page
Loading...