1. Overview of the equipment
Front Panel
Rear Panel
Remote Control
Installing remote control batteries
Remote Control Universal Code Setting
Accessories
2. Connecting your HD-STB
1) Antenna Connection
2) Video Connection
Connecting to a HDTV with HD YPbPr
Connecting to a Conventional TV with S-Video
Connecting to a Conventional TV with Composite Video
3) Audio Connection
Stereo Audio Connection
Digital Audio Connection
4) Display Mode Change
STB
STB
3. Getting Started
Step 1. Unpacking and accessories.
Step 2. Remove Protective Plastic Film.
Step 3. Connect ANT Cable.
Step 4. Connecting the Video.
Step 5. Connecting the Audio.
Step 6. Connecting the Power.
Step 7. Display Mode Setup.
Step 8. Install Remote Control battery and Universal
Code Setting.
Step 9. Check up the On Screen Display.
Step 10. Automatic Channel Search and Channel Change.
4. Using menu system
1) User Preference
Preferred Audio Type(I-II)
SD Output Aspect Ratio
Front Panel LED Dimmer
Power Restore
HD-STB, TV and VCR antenna connection
HD-STB and TV antenna connection
HDMI (High Definition Multimedia Interface) connection
Connection to 576p/720p/1080i High Definition Display
Connection to Standard Definition Display
i-Plate Banner Duration
1
CONTENTS
- - - - - - - - - - - - - 3
- - - - - - - - - - - - - - - - - - - - - - - - - - - 3
- - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
- - - - - - - - - - - - - - - - - - - - - - - - - - 5
- - - - - - - - -- - - - - - - - 8
- - - - - - - - - - - - - - 8
- - - - - - - - - - - - - - - - - - - - - - - - 10
- - - - - - - - - - - - - 11
- - - - - - - - - - - - - - - - - - - - - - - - 11
- - - - - - - - - - - - - - - - - -- - - - - - - - - 12
- - - - - - - - - - - - - - - - - - - - - - - - - - 15
- - - - - - - - - - - - - - - - - - - - - - - - - 16
- - - - - - - - - - - - - - - - - - - 17
- - - - - - - - - - - - - - - - - 19
- - - - - - - - - - - - - - - - - - - - - - - - - - - 19
To Next Page
Loading...