Specifications
Section
Detailed section
Explanation
Terrestrial Input Signal
Input Frequency
VHF: 174MHz to 230MHz
UHF: 520MHz to 820MHz
Transmission System
Channel Assignment
Channel Bandwidth
Channel Offset
Input Signal Level
Antenna Input
Loop Output
OFDM Spectrum Mode
Modulation Modes
Guard Interval Modes
SD Video Output
FEC Modes
DVB-T/OFDM
Australian Assignment
7MHz
+/- 125KHz
-90dBm ~ -20dBm
75Ω Female IEC-Connector (PAL Type)
75Ω Male IEC-Connector (PAL Type)
2K and 8K Hierarchical
QPSK, 16QAM, 64QAM
1/32, 1/16, 1/8, 1/4 Active Symbol Duration
S- Video (Y/C), Composite Video(CVBS)
Rate 1/2, 2/3, 3/4, 5/6, 7/8
Algorithm
MPEG-2 compatible MP@ML, MP@HL
Decoding Format
All of Australia Digital TV Standard
Display Aspect Ratio
Widescreen or PB Zoom
HDMI Output
Native Mode : 1080i, 720p, 576p
HD YPbPr Output
Native Mode : 1080i, 720p, 576p
HD Analog Video output
HD Digital Video Output
Algorithm
MPEG-1 layers 1 and 2, MPEG-2 layers 2
Dolby Digital (AC-3)
Frequency Response
20Hz~ 20 kHz, < ±2dB
Sampling Frequency
32, 44.1 and 48 kHz
Analog Audio Output
Stereo (RCA phone jack), 2.0Vrms Max,
>10K ohm (1 Sets)
Digital Audio Output
S/PDIF optical(TOS Link), S/PDIF coaxial(RCA)
Audio
Video
34
To Next Page
Loading...