Specifications
Section
Detailed section
Explanation
Controller Features Main CPU
32 bit RISC
S/W Download
Menu System
Channel Memory
Remote Controller
Upgrade via RS-232C (9 pin D-SUB connector)
Graphic User Interface
Max. 256 Channel
IR Remote Controller with Universal TV Key
Power Power
Operating Frequency
Standby Power Consumption
Power Protection
Slow Blow Fuse (250V, 2A)
Less than 2 W
50/60Hz ±5%
AC 180 - 250V ~ ± 5%, Max. 15W
Environmental
Condition
Operating Humidity
Operating Temperature
Storage Humidity
Storage Temperature
Weight
Dimension
340mm X 65mm X 270mm (WxHxD)
Approx. 3Kg
5% ~ 90 % Non-condensed
-10 ~ +50 ℃
5% ~ 90 % Non-condensed
0 ~ 40 ℃
Note : Specifications are subject to change without notice
35
Using Direct Entry Remote Control
Universal Code Setting
1) Locate your CE component brand in R/C Code List.
2) Turn on the component you wish to control.
3) Press & hold component key until component key red LED remains on, then release
it.
4) Enter 3-digit code from the R/C Code list. Component key LED flashes three times
and TV switches off.
5) If component does not switch off, repeat above steps using the next code number as
listed for your component brand until component switches off.
To Next Page
Loading...