11
3 Operation
3.1 About this manual
• Each time a push-button are referred to in this manual, the push-button
name will appear in bold and CAPITAL letters, e.g. MODE.
• Unless otherwise stated, the push-button presses are momentary.
• Each time a function is mentioned in the text, it will be in brackets and in
the same format, where possible, as displayed, e.g. [AWA].
• This manual has been written to be: Compatible with Wind Data
instrument from software version 1.0.
• All functions followed by the text option is not valid in a factory set-up
instrument. See calibration to be able to display these functions.
Note!
We have put down a lot of effort in order to make this manual correct and
complete. But since we continuously make our products better, some
information can differ from the products functions. If you need further
information contact your national distributor
4: OPERATION
To Next Page
Loading...
