Network Video Recorder NVR Menu
The red highlighted date means there is file.
Otherwise, there is no file.
In any play mode, click the date you wantto see,
you can see the corresponding record file trace
in the time bar.
Select the channel number to query. (Up to four
channels simultaneously selected)
Select the date, channel number and record
type, click into the video file list. Select the
desired video file, double-click the left mouse
button to start playing the video file.
Select the file(s) you want to backup fromthe file
list. Then click the backup button, now you can
see the backup menu. Click the backup button
to begin the backup operation. Check the file
again you can cancel current selection.
On the playback control bar, you can normally
play, pause, fast forward, fast forward playback
mode, you can select 1×, 2×, 4×, 8×, 16×, 1×which
is played at normal speed;
Query to the video file, updated for the day that
recording tracks on the timeline. Under the
four-frame playback mode, display the selected
four channels corresponding to four playback
timeline, other playback mode displays only one
playback timeline. Click on the green area to
start from that point of time for playback.
Select the type of video, you can choose the
type for all types of video, timed recording, alarm
recording and detection recording.
Including 24h, 2h, 1h and 30min, the smaller units
of time the greater the proportion of time zoom,
you can adjust the exact point in time to play
back video on the timeline.
To Next Page
Loading...