Nibe BA-SVM 10-200 Series User Manual

58 NIBE BA-SVM 10-200
Select “search installed slave devices” and press the
OK button to automatically find connected slaves for
the master heat pump.
In order to activate 4-pipe cooling, select the function
“BA-SVM 4-pipe cooling” .
ACTIVATING THE 4-PIPE COOLING OPERATION
If a slave device is connected to the master installa-
tion, it is specified here.
There are two ways of activating connected slave de-
vices. You can either select the given option in the list
or use the automatic function “search installed slave
devices”.
Menu 5.2.2 - Installed slave devices
Search installed slave devices
Here is where it states if an accessory is installed
(see “Accessories” section).
There are two ways of activating connected acces-
sories. You can either select the given option in the
list or use the automatic function “search installed
accessories”.
Menu 5.2.4 - Accessories
Menu 5.3.2 - Add. heat. ctrl shunt valve
Menu 5.3.3 - Additional climate system
Menu 5.3.6 - step controlled add. heat
CAUTION
Menu 5.3.2 is deactivated in the factory settings. For this
menu function to be active, it is necessary to install ac-
cessory AXC 30 and activate it in the Accessories menu
5.2.4.
CAUTION
Menu 5.3.3 is deactivated in the factory settings. For
this menu function to be active, it is necessary to install
accessory ECS and activate it in the Accessories menu
5.2.4.
CAUTION
Menu 5.3.6 is deactivated in the factory settings. For this
menu function to be active, it is necessary to install ac-
cessory AXC 30 and activate it in the Accessories menu
5.2.4.
For a detailed description of how to program accessories,
refer to the instructions of the individual accessories.
For a detailed description of how to program accessories,
refer to the instructions of the individual accessories.
For a detailed description of how to program accessories,
refer to the instructions of the individual accessories.
The operating settings for installed and activated ac-
cessories are entered in the submenus for this.
For a detailed description of how to program accessories,
refer to the instructions of the individual accessories.
Menu 5.3 - Accessory settings
CAUTION
Menu 5.3 is deactivated in the factory settings. For this
menu function to be active, it is necessary to install an
accessory and activate it in the Accessories menu 5.2.4.
Search installed accessories
Select “search installed accessories” and press the
OK button to automatically find connected accesso-
ries for the controller.
Section 9 | Control

Nibe BA-SVM 10-200 Series Specifications

General

Brand	Nibe
Model	BA-SVM 10-200 Series
Category	Air Conditioner
Language	English