3
F1245 – at your service
Set the indoor climate
Overview
WHPSHUDWXUH
,1'225 &/,0$7(
YHQWLODWLRQ
VFKHGXOLQJ
DGYDQFHG
RII
QRUPDO
Sub-menus
For the menu INDOOR CLIMATE there are several sub-menus. Status inform-
ation for the relevant menu can be found on the display to the right of the
menus.
temperature Setting the temperature for the climate system. The status in-
formation shows the set values for the climate system. Tab for cooling system
is only displayed if accessory for cooling are present or if the heat pump has
the integrated cooling function.
ventilation Setting the fan speed. The status information shows the selected
setting. This menu is only displayed if the exhaust air module is connected
(accessory).
scheduling Scheduling heating, cooling and ventilation. Status information
"set" is displayed if you set a schedule but it is not active now, "holiday set-
ting" is displayed if the vacation schedule is active at the same time as the
schedule (the vacation function is prioritised), "active" displays if any part of
the schedule is active, otherwise it displays " off".
advanced Setting of heat curve, adjusting with external contact, minimum
value for supply temperature, room sensor and cooling function.
NIBE™ F1245Chapter 3 | F1245 – at your service24
To Next Page
Loading...
