Nibe F1245 - Advanced Menu

Activated: Scheduling for the selected period is activated here. Set times are
not affected at deactivation.
Day: Select which day or days of the week the schedule is to apply to here.
To remove the scheduling for a particular day, the time for that day must be
reset by setting the start time to the same as the stop time. If the line "all"
is used, all days in the period are set for these times.
Time period: The start and stop time for the selected day for scheduling are
selected here.
Adjusting: The desired fan speed is set here.
TIP
If you wish to set similar scheduling for every day of the week start by filling
in “all” and then changing the desired days.
Caution
If the stop time is before the start time it means that the period extends past
midnight. Scheduling always starts on the date that the start time is set for.
A significant change over a longer period of time may cause poor indoor
environment and worse operating economy.
advanced
DGYDQFHG 
KHDWLQJ FXUYH
H[WHUQDO DGMXVWPHQW
PLQ IORZ OLQH WHPS
URRP VHQVRU VHWWLQJV
FRROLQJ VHWWLQJV
IDQ UHWXUQ WLPH
Menu
1.9
Menu advanced has orange text and is intended for the advanced user. This
menu has several sub-menus.
heating curve Setting the heating curve slope.
NIBE™ F1245Chapter 3 | F1245 – at your service32