Nibe F1245 - Heating Curve

external adjustment Setting the heat curve offset when the external contact
is connected.
min. flow line temp. Setting minimum permitted flow line temperature.
room sensor settings Settings regarding the room sensor.
cooling settings Settings for cooling.
fan return time Fan return time settings in the event of temporary ventilation
speed change.
own curve Setting own heat curve.
point offset Setting the offset of the heating curve at a specific outdoor
temperature.
heating curve
KHDWLQJ FXUYH 
V\VWHP
RXWGRRU WHPS r&
IORZ WHPSHUDWXUH r&
heating curve
Setting range: 0 - 15
Default value: 9
Menu
1.9.1
In the menu heating curve the so-called heating curve for your house can
be viewed. The task of the heating curve is to give an even indoor temperat-
ure, regardless of the outdoor temperature, and thereby energy efficient
operation. It is from this heating curve that the heat pump’s control computer
determines the temperature of the water to the heating system, flow line
temperature, and therefore the indoor temperature. You can select heating
33NIBE™ F1245Chapter 3 | F1245 – at your service