Caution
If the stop time is before the start time it means that the period extends past
midnight. Scheduling always starts on the date that the start time is set for.
Changes of temperature in accommodation take time. For example, short
time periods in combination with underfloor heating will not give a noticeable
difference in room temperature.
cooling (accessory required)
Here you can schedule when cooling is permitted in the accommodation for
up to two different time periods per day.
Menu
1.3.2
If two settings conflict with each other a red exclamation mark is displayed
at the end of the line.
6&+('8/,1* &22/,1*
DFWLYDWHG
VFKHGXOH VFKHGXOH
DOO
PRQ
WXHV
ZH
WKXU
IUL
VDW
VXQ
RQ
7LPH SHULRG $GMXVWLQJ'D\
$FWLYDWHG
6FKHGXOH
&RQIOLFW
Schedule: The schedule to be changed is selected here.
Activated: Scheduling for the selected period is activated here. Set times are
not affected at deactivation.
Day: Select which day or days of the week the schedule is to apply to here.
To remove the scheduling for a particular day, the time for that day must be
reset by setting the start time to the same as the stop time. If the line "all"
is used, all days in the period are set for these times.
NIBE™ F1245Chapter 3 | F1245 – at your service30
To Next Page
Loading...
