Nibe FLM Installer Manual

INSPECTION OF THE INSTALLATION
In addition, fill in the page for the installation data in the User Manual.
Current regulations require the heating installation to be inspected before it is commissioned. The inspection must
be carried out by a suitably qualified person. Current regulations require the exhaust air module to be inspected
before it is commissioned. The inspection must be carried out by a suitably qualified person. In addition, fill in the
page for the installation data in the User Manual.
DateSignatureNotesDescription
✔
Ventilation (page 14)
Setting the ventilation flow
Brine (page 12)
Non-return valve
System flushed
System vented
Antifreeze
Expansion vessel
Particle filter
Safety valve
Shut off valves
Circulation pump setting
Checking the condensation water seal
Trim valve
Electricity (page 17)
Connections
Phase voltage
Supply connected 230 V
Circuit fuses
5Chapter 1 | Important informationNIBE FLM

Nibe FLM Specifications

General

Brand	Nibe
Model	FLM
Category	Control Unit
Language	English