To Next PageTo Next PageWhat does 'Device Error' mean on my Nice Gate Opener?
A 'Device Error' on your Nice Gate Opener means the position sensor is not being correctly detected by the board, or there is an active input preventing the learn process. Resolve this by: * Ensuring Motor 1 and Motor 2 position sensors are correctly connected for the actuator type. * Making sure there are no active inputs.
What does 'Photo Test FAIL!' mean on my Nice Gate Opener?
If your Nice Gate Opener displays 'Photo Test FAIL!', it means the BlueBus monitored sensor check has failed. To fix this: * Verify the photo eye is connected. * Ensure it's aligned correctly. * Check that internal jumpers are set correctly.
How to troubleshoot a Nice 7251 that won't power on?
If your Nice Gate Opener isn't powering on, here are a few things you can check: * Ensure that the power to the circuit board is turned ON. * Inspect the terminal block wiring for any loose or broken wires. * If the voltage is OK, check the terminal block itself. * Check the fuses, as there may be both AC and DC fuses in the installation.
What does Static M2 mean on my Nice Gate Opener?
Static M2 signifies that the actuator connected to Motor 2 has an extended current spike and tripped the Type A sensor. Inspect the gate path for obstructions and check the gate hardware for degradation.
What does Static M1 mean on my Nice 7251 Gate Opener?
Static M1 indicates the actuator connected to Motor 1 has an extended current spike and tripped the Type A sensor. You should check for any obstructions in the gate's path or if there is degraded gate hardware.
What does Dynamic M2 mean on my Nice 7251?
Dynamic M2 means that the actuator connected to Motor 2 experienced a brief current spike, tripping the Type A sensor. Check the gate path for any obstructions or examine the gate hardware for signs of degradation.
What does Dynamic M1 mean on my Nice 7251?
Dynamic M1 indicates that the actuator connected to Motor 1 experienced a brief current spike and tripped the Type A sensor. Check for obstructions in the gate path or degraded gate hardware.
What does it mean when the 'Input STOP!' error appears on my Nice Gate Opener?
If you're seeing an 'Input STOP!' error on your Nice Gate Opener, it means the STOP input is not connected to GND. To resolve this: * Ensure a jumper wire is being used. * Check the external stop button wiring.
What to do if Nice 7251 battery backup system doesn't work during a power outage?
If your Nice Gate Opener's battery backup system fails to open the gate during an AC power outage: * Check if the backup system is configured to automatically open the gate or if it requires an input to open. * Verify the batteries have the correct voltage and replace them if needed.
Why does my Nice Gate Opener open by itself?
If your Nice Gate Opener is opening on its own, check the accessory inputs and clear them as necessary.
General| Brand | Nice |
|---|---|
| Model | 7251 |
| Category | Gate Opener |
| Language | English |
Lists key features of the 1050 control board for gate operators.
Defines the four UL325 usage classes for gate operator installations.
Defines entrapment zones and protection requirements per UL325.
Emphasizes that gate operator installation is not a DIY project and requires professionals.
Step-by-step guide for mounting the control box on posts for the 7251 model.
Instructions for installing the control box on a concrete pad for the 7351 model.
Instructions for placing the battery within the operator chassis.
Wiring instructions for the 7251 model's motor to the control board.
Wiring instructions for the 7351 model's motor to the control board.
Guidance on positioning photo eyes for optimal entrapment protection.
Steps for configuring jumper settings on BlueBUS photo eyes.
Procedures for physically installing and wiring BlueBUS photo eyes.
How to connect the wired photo eyes to the control board.
Adjusting the left or right hand knob to set the open limit.
Adjusting the knob to set the gate's closed position.
Guide to interpreting photo eye LED status and resolving issues.
Step-by-step instructions for aligning BlueBUS photo eyes.
Procedure for testing the functionality of installed photo eyes.
Explains how to navigate the menus and use the control board buttons.
Details settings for gate force sensitivity and obstacle detection.
Configuration options for gate speed, acceleration, and slowdown.
Initiates the gate operator learning process for limits and settings.
Details wiring for output terminals like relays and magnetic locks.
Explains connections for various input devices like safety loops and sensors.
Details the limited warranty terms and conditions for Nice-branded products.
