9
Testing
a) Stand clear of the door, press the remote control’s button and
verify that the operator starts. PRESS THE REMOTE CONTROL’S
BUTTON AGAIN TO STOP THE DOOR MID-TRAVEL.
a
Replacing a Remote Control’s Batteries
When the BLUE light on the remote glows dimly, or fails to light
at all when the remote is activated, the batteries need replacing.
Follow the steps in the illustration.
1 2 3
4 5 6
OPEN CASE REMOVE
BOARD
REMOVE
COVER
REMOVE
OLD BATTERY,
DISPOSE OF
PROPERLY
REPLACE
WITH FRESH
BATTERY
RE-ASSEMBLE
REMOTE
To Next Page
Loading...
