Unidrive M/HS Frame 5 to 6 Power Installation Guide 29
Issue Number: 9
Safety information Product information
Mechanical installation
Electrical installation Technical data UL listing information
3.4.3 Through-panel mounting
The drive can be through panel mounted using appropriate brackets.
The through panel mounting kit is not supplied with the drive and can be purchased separately, below
are the relevant part numbers:
Figure 3-9 Through-panel mounting dimensions (size 5 to 6)
Size CT part number
5 3470-0067
6 3470-0055
If the drive has been used at high load levels for a period of time, the heatsink can reach
temperatures in excess of 70 °C (158 °F). Human contact with the heatsink should be
prevented.
5
78 mm
(3.07 in)
78 mm
(3.07 in)
137 mm (5.39 in)
156 mm (6.14 in)
169 mm (6.65 in)
167 mm (6.57 in)
393 mm (6.57 in)
Æ 5.2 mm
(0.2 in)
(x 4 holes)
196 mm (7.72 in)
Ø7.0 mm (0.27 in)
(x 6 holes)
98 mm (3.86 in)
203 mm (7.99 in)
98 mm (3.86 in)
399 mm (15.71)
264 mm (10.39 in)
21 mm (0.83 in)
167 mm (6.58 in)
Æ 5. mm2
(0.20 in)
(x 6 holes)
6
224 mm (8.82 in)
53 mm
(2.1 in)
53 mm
(2.1 in)
106 mm (4.17 in)
Æ6.5 mm
(0.25 in)
(x 4 holes)
26 mm
(1.02 in)
26 mm
(1.02 in)
359 mm (14.13 in)
120 mm (4.73 in)
26 mm
(1.02)
17 mm
(0.66 in)
358 mm (14.09 in)
26 mm
(1.02)
26 mm
(1.02)
112 mm
(4.41 in)
112 mm
(4.41 in)
To Next Page
Loading...
