7
RULES FOR YOUR SAFETY
NIDO ONE V2 is not intended for use by
children under fourteen years of age.
Before using NIDO ONE V2, please read this manual
carefully and follow all the recommendations.
It is important to keep this manual for future
reference. Do not leave NIDO ONE V2 unattended in
the presence of children to prevent them from coming
into contact with fertilisers or acids.
Unplug NIDO ONE V2 when not in use. Keep NIDO
ONE V2 away from water jets.Clean NIDO ONE V2
with a damp cloth only.
Damaged components may affect the accuracy of
NIDO ONE V2. In case of malfunction, do not use
NIDO ONE V2, contact customer service
WhatsApp (messages only): +39 327 684 4189.
Repairs to NIDO ONE V2 should only be carried out
by authorised service centres.
Improper tampering, repair or maintenance of NIDO
ONE V2 may cause serious risk and injury to the user.
Children should not play with NIDO ONE V2.
NIDO ONE V2 is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they are provided with supervision
or instruction in the use of the device by a person
responsible for their safety.
Cleaning and maintenance must not be carried out by
unsupervised children.
NIDO S.r.l. reserves the right to make changes to
the product for constructive or commercial reasons,
at any time, without any obligation to update this
manual. These changes will be made in order to
improve the product and its features.
Don’t expose NIDO ONE V2 to direct
sunlight.
RECOMMENDATIONS
Keep these instructions in mind.
The use of plastic gloves and safety goggles is
recommended when using phosphoric acid (H3PO4),
potassium hydroxide (KOH) and fertiliser.
Do not scratch, cut or pull the power and probe cables
of NIDO ONE V2.
If you notice any abnormality (burning smell, etc.),
unplug the power supply and contact Customer
Service assistenza@nidopro.com -
WhatsApp (solo mensajes) +393276844189.
If NIDO ONE V2 continues to operate in an abnormal
state, there is a danger of re and breakage.
If the power cord or power supply is damaged, it
must be replaced by the manufacturer or a qualied
technician.
Do not expose NIDO ONE V2 to weather or direct
sources of heat. NIDO ONE V2 may freeze and go
into protection if exposed to temperatures above 40
degrees.
ALWAYS UNPLUG FROM POWER
Before performing maintenance or modications,
unplug NIDO ONE V2 from the power outlet to avoid
electric shocks.
KEEP AWAY FROM LIQUIDS
Do not wet components, sensors, and cables to
prevent short circuits.
HANDLE CABLES WITH CARE
Do not bend or pull cables to avoid damage.
PLACE NIDO ONE V2 IN A SAFE LOCATION
Keep NIDO ONE V2 away from heat, humidity, and
direct light.
SAFE CLEANING
Before cleaning, unplug NIDO ONE V2 from the
power outlet; use only a damp cloth, and avoid
sprays and solvents.
To Next Page
Loading...