89P, S, A, and M Modes
❚❚ Time
1 Rotate the mode dial to M.
2 Choose the shutter speed.
Rotate the command dial left to choose a
shutter speed of “Time” (&).
3 Open the shutter.
After focusing, press the shutter-release button on the camera or optional
remote control, remote cord, or wireless remote controller all the way down.
4 Close the shutter.
Repeat the operation performed in Step 3 (shooting ends automatically if the
button is not pressed after 30 minutes).
A ML-L3 Remote Controls
If you will be using an ML-L3 remote control, select one of the following remote control
modes as described on page 70: " (Delayed remote (ML-L3)) or # (Quick-response
remote (ML-L3)).
Note that if you are using an ML-L3 remote control, pictures will be taken
in “Time” mode even when “Bulb”/A is selected for shutter speed.
Mode dial
Command dial
To Next Page
Loading...
