79More on Photography
GPS Options
Use the Location data > GPS options item in the setup menu to adjust settings for
the built-in location data unit.
❚❚ Standby Timer
Choose whether the exposure meters turn off automatically when the location data
function is enabled.
❚❚ Set Clock from Satellite
Choose Ye s to set the camera clock based on the time provided by the satellite
navigation system.
Option Description
Enable
Exposure meters turn off automatically if no operations are performed for the time
selected for Custom Setting c2 (Auto off timers; 0 186) > Standby timer (to allow
the camera time to acquire location data, the delay is extended by up to one minute
after the standby timer is activated or the camera is turned on).
This reduces the
drain on the battery.
Disable Exposure meters do not turn off while the location data function is enabled.
To Next Page
Loading...
