99P, S, A, and M Modes
3 Choose the number of shots.
Highlight Number of shots and press 2.
The dialog shown at right will be displayed.
Press 1 or 3 to choose the number of
exposures that will be combined to form a
single photograph and press J.
4 Choose the amount of gain.
Highlight Auto gain and press 2.
The following options will be displayed.
Highlight an option and press J.
• On: Gain is adjusted according to number
of exposures actually recorded (gain for
each exposure is set to
1
/2 for two
exposures,
1
/3 for three exposures).
• Off: Gain is not adjusted when recording
multiple exposure.
Recommended if
background is dark.
5 Frame a photograph, focus, and shoot.
In single-frame release mode, one
photograph will be taken each time the
shutter-release button is pressed; continue
shooting until all exposures have been recorded.
In continuous high-speed
and continuous low-speed release modes (0 46), the camera records all
exposures in a single burst; shooting will pause after each multiple exposure.
To Next Page
Loading...
