105P, S, A, and M Modes
4 Select Ye s .
The menu shown at right will be displayed;
highlight Ye s and press J.
The camera will enter preset measurement
mode.
When the camera is ready to measure white
balance, a flashing D (L) will appear in
the viewfinder and information display.
5 Measure white balance.
Before the indicators stop flashing, frame the
reference object so that it fills the viewfinder
and press the shutter-release button all the
way down.
No photograph will be recorded;
white balance can be measured accurately
even when the camera is not in focus.
To Next Page
Loading...
