114 P, S, A, and M Modes
A The Picture Control Grid
To display a grid showing saturation (non-monochrome controls
only) and contrast for the Picture Control selected in Step 2, press and
hold the X button.
The icons for Picture Controls that use auto contrast and saturation
are displayed in green in the Picture Control grid, and lines appear
parallel to the axes of the grid.
A Previous Settings
The line under the value display in the Picture Control setting menu
indicates the previous value for the setting.
A Custom Picture Controls
The options available with custom picture controls are the same as those on which the
custom picture control was based.
A Filter Effects (Monochrome Only)
The options in this menu simulate the effect of color filters on monochrome photographs.
The following filter effects are available:
Option Description
Y Yellow
Enhances contrast.
Can be used to tone down the brightness of the sky in
landscape photographs.
Orange produces more contrast than yellow, red
more contrast than orange.
O Orange
R Red
G Green Softens skin tones.
Can be used for portraits.
Note that the effects achieved with Filter effects are more pronounced than those
produced by physical glass filters.
A Toning (Monochrome Only)
Choose from B&W (black-and-white), Sepia, Cyanotype (blue-tinted
monochrome), Red, Ye l l o w , Green, Blue Green, Blue, Purple Blue,
Red Purple.
Pressing 3 when Toning is selected displays saturation
options.
Press 4 or 2 to adjust saturation.
Saturation control is not
available when B&W (black-and-white) is selected.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
