Nikon D5300 - Page 152

132 Recording and Viewing Movies
4 Choose the current frame as the new
start or end point.
To create a copy that begins from the current
frame, highlight Start point and press J.
The frames before the current frame will be
removed when you save the copy.
To create a copy that ends at the current frame, highlight End point and press
J. The frames after the current frame will be removed when you save the copy.
5 Confirm the new start or end point.
If the desired frame is not currently
displayed, press 4 or 2 to advance or
rewind (to skip to 10 s ahead or back, rotate
the command dial).
6 Create the copy.
Once the desired frame is displayed, press 1.
7 Preview the movie.
To preview the copy, highlight Preview and
press J.
To abandon the current copy and
return to Step 5, highlight Cancel and press
J; to save the copy, proceed to Step 8.
Start point
End point