129P, S, A, and M Modes
Exposure Compensation
Exposure compensation is used to alter exposure from the value
suggested by the camera, making pictures brighter or darker
(0 367).
In general, positive values make the subject brighter
while negative values make it darker.
It is most effective when
used with M (Center-weighted metering) or N (Spot
metering) (0 125).
To choose a value for exposure compensation, keep the E (N)
button pressed and rotate the command dial until the desired
value is selected in the viewfinder or information display.
–1 EV No exposure
compensation
+1 EV
E (N) button Command dial Information display
–0.3EV +2EV
To Next Page
Loading...
