Nikon D5500 - Page 208

184 Recording and Viewing Movies
4 Choose the current frame as the new
start or end point.
To create a copy that begins from the
current frame, highlight Start point
and press J. The frames before the
current frame will be removed when
you save the copy.
To create a copy that ends at the current frame, highlight End
point and press J. The frames after the current frame will be
removed when you save the copy.
5 Confirm the new start or end point.
If the desired frame is not currently
displayed, press 4 or 2 to advance or
rewind (to skip to 10 s ahead or back,
rotate the command dial one stop).
6 Create the copy.
Once the desired frame is displayed, press 1.
Start point
End point