Nikon DIAPHOT 300 - Electrical Specifications

ELECTRICAL SPECIFICATIONS
■ Diaphot 300
Input Ratings
------
12V DC, 100W
Halogen Lamp
Lamp rating: 12V, 1 00W
Lamp type: OSRAM HLX64623 or PHILIPS 7724
Protection Class
Class III
Comforming Standards
This product conforms to DIN VDE 0411, IEC1 01 0 and
UL1262.
■ PSM-1 1 20 (Power Supply Unit for 100-120V Input voltage)
Input Ratings
100-1 20V~, 3A, 50/60Hz
Output Ratings
12V DC, 100W
Protection Class
Class I
Comforming Standards
This product conforms to UL1 262.
Power Supply Cord
Instruction
Use only the following cord set.
UL Listed, detachable cord set. 3-conductor grounding
type SVT, No. 1 8 AWG rated a minimum 1 25V,7A.
■ PSM-2 1 20 (Power Supply Unit for 220-240V Input voltage)
Input Ratings 220-240V —, 2A, 50/60Hz
Output Ratings
12V DC, 100W
Protection Class
Class I
Comforming Standards
This product conforms to EN60950 and
DIN VDE 041 1 .
Power Supply Cord
Instruction
Use only approved 3-pole power supply cord type
H05VV-F or H0VVH2-F, min. 0.75mm 2
Class I equipment should be connected to PE
(protective earth) terminal.
In case of using the extention cord, use only the power
supply cord included PE wire.
53