Nikon ECLIPSE 80i - Bright-Field Microscopy

Chapter 1 Part Names and Microscopy Procedures (Bright-Field Set)
1.3 Bright-Field Microscopy
18
1.3
Bright-Field Microscopy
1
Turn on power.
2
Press the preset switch.
3
Move the ND8, ND32, and NCB11
filters into the optical path.
4
Push in the optical path
switching lever to direct the full
optical path toward the
binocular section.
Press the power
switch to the "|"
position.
Press the
p
reset switch.
The full optical
path directed
toward the
binocular
section
Push in the optical
path-switching lever.
ND8
ND32
NCB11