Nikon ECLIPSE 80i - Bright-Field Microscopy

Chapter 2 Part Names and Microscopy Procedures (With Epi-illumination Attachment Mounted)
2.3 Bright-Field Microscopy
27
2
2.3
Bright-Field Microscopy
1
Turn on power.
2
Press the preset switch.
3
Move the ND8, ND32, and
NCB11 filters into the optical
path.
4
Push the optical path-switching
lever to direct the full optical
path toward the binocular
section.
Press the
p
ower switch to
the "|" position.
Press the
p
reset switch.
ND8
ND32
NCB11
The full optical
path directed
toward binocular
section
Push in the optical
path-switching lever.