VI Assembly
2 Replacement of Consumable Materials
40
(1) Turn off the power switch (turn to {) and
unplug the power cord.
(2) Wait about 30 minutes until the lamp and its
surroundings are cool enough to touch.
(3) Hold the field lens unit at the vertical grooves
on both sides and pull it toward you to
remove it.
(4) Remove the old lamp.
(5) Hold a new lamp wearing gloves or using a
cloth. Insert the lamp’s contact pins fully into
the socket holes straight and securely.
(6) Put the field lens unit back in place.
(7) Plug the power cord.
Socket
Lam
To Next Page
Loading...
