Nikon N Series/K Series Total Station Instruction Manual 31
Getting Started 3
EDM measurement status (N 2" and N 5" only)
When you are taking measurements, the EDM measurement status shows the mode
that is being used.
When you display observation data, the EDM measurement status shows the mode
that was used when the data was collected:
Communication port status
Bluetooth enabled icon shows the Bluetooth is selected for the Port setting in the
Communication menu. (See Communications, page 120.)
Battery indicator
The battery indicator shows the battery voltage level:
If the battery level is critically low, the following
message appears:
Reflectorless mode
Bluetooth enabled
Level 4 (Full)
Level 3
Level 2
Level 1
Battery low
To Next Page
Loading...
